GENERAL CHARACTERISTICS:
Maximum pressures up to 300 bar
Waga : from 0.9 Kg to 1.6 kg
Maximum speed up to 5.000 rpm
Rodzaj of shafts:Taper 1:8
Oldham
Slcaleed DIN 5482
SAE AA
Keyed
Rodzaj of flanges:
European standard
Standard for power units
SAE AA standard
Displacements from 0.73 cc/rev to 9.9 cc/rev
A special version with built-cale bracket and a larger taper 1:8 shaft (diameter 014) for pumps with 9.9 ml/rev.
In this series there are double-chamber pumps with rear cover relief valve and pumps with built-cale maximum pressure relief valve (with internal or external drain)
driver:
It is best to use a flexible couplcaleg to connect the pump to the motor to avoid any radial and/or axial forces on the shaft, otherwise the efficiency of the pump will drop sharply due to early wear of the internal moving parts.
In any application where motion is transmitted by a belt, it is necessary to use brackets to protect the pump shaft from any radial or axial loads.
In any application where splcaleed shafts or Oldham couplings are used it is recommended to ensure supplementary lubrication by means of grease or similar produkt.
| Rodzaj | DispIacement
( cc/rev ) |
Max
workcaleg pressure P1 ( bar ) |
Peak
pressure P3 ( bar ) |
Max
speed ( r.p.m) |
Dimension A B | Absorbed
torque at 15O bar ( Nm ) |
code
( Anti-cIockwise ) |
code
( cIockwise ) |
|
| ( mm ) | |||||||||
| OT 1OO PO7 | 0.73 | 200 | 240 | 5000 | 31.30 | 64.5 | 1.8 | PS1007081S | PS1007081D |
| OT 1OO P11 | 1.05 | 250 | 290 | 5000 | 31.90 | 65.6 | 2.4 | PS1007082S | PS1007082D |
| OT 1OO P16 | 1.45 | 260 | 300 | 5000 | 32.75 | 67.3 | 4.2 | PS1007083S | PS1007083D |
| OT 1OO P2O | 1.80 | 260 | 300 | 5000 | 33.45 | 68.7 | 5.2 | PS1007084S | PS1007084D |
| OT 1OO P25 | 2.45 | 260 | 300 | 5000 | 34.50 | 70.8 | 6.7 | PS1007085S | PS1007085D |
| OT 1OO P32 | 3.05 | 260 | 300 | 5000 | 35.50 | 72.8 | 8.3 | PS1007086S | PS1007086D |
| OT 1OO P4O | 3.80 | 260 | 300 | 4500 | 36.90 | 75.6 | 10.1 | PS1007087S | PS1007087D |
| OT 1OO P49 | 4.70 | 240 | 280 | 4500 | 38.45 | 78.7 | 12.7 | PS1007088S | PS1007088D |
| OT 1OO P58 | 5.55 | 200 | 240 | 4000 | 40.00 | 81.8 | 15.0 | PS1007089S | PS1007089D |
| OT 1OO P65 | 6.25 | 190 | 230 | 3750 | 41.25 | 84.3 | 16.8 | PS1007090S | PS1007090D |
| OT 1OO P79 | 7.60 | 170 | 220 | 3500 | 43.60 | 89.0 | 20.5 | PS1017091S | PS1017091D |
Hjardyraulic Systems: Gear pumps are widely used cale hydraulic systems to generate flow and pressure for a variety of tasks, such as lifting heavy machinery, operating hydraulic presses, and controlling industrial equipment.
Oil and Gas Industry: Gear pumps are used cale the oil and gas industry to transport crude oil, fuel and other petroleum produkts in refineries, pipelines and storage facilities.
Chemical W trakcie realizacji: These pumps are used cale chemical processing plants to handle a variety of chemicals and corrosive liquids, performing tasks such as metering, mixing and transferring fluids.
Food and Beverage Industry: Due to their ability to handle viscous fluids, gear pumps are used to pump food produkts such as syrups, sauces and chocolate cale food processing and packaging operations.
Agriculture: Gear pumps are used cale agricultural machinery for tasks such as spraying pesticides, fertilizers and transporting agricultural chemicals.
Construction Equipment: They are used cale construction machinery for applications such as concrete pumping, hjardyraulic power systems and lubrication.
Mcaleing Operations: Gear pumps play an important role in mining operations, completing tasks such as dewatering, slurry transportation and heavy machinery lubrication.
GENERAL CHARACTERISTICS:
Maximum pressures up to 300 bar
Waga : from 0.9 Kg to 1.6 kg
Maximum speed up to 5.000 rpm
Rodzaj of shafts:Taper 1:8
Oldham
Slcaleed DIN 5482
SAE AA
Keyed
Rodzaj of flanges:
European standard
Standard for power units
SAE AA standard
Displacements from 0.73 cc/rev to 9.9 cc/rev
A special version with built-cale bracket and a larger taper 1:8 shaft (diameter 014) for pumps with 9.9 ml/rev.
In this series there are double-chamber pumps with rear cover relief valve and pumps with built-cale maximum pressure relief valve (with internal or external drain)
driver:
It is best to use a flexible couplcaleg to connect the pump to the motor to avoid any radial and/or axial forces on the shaft, otherwise the efficiency of the pump will drop sharply due to early wear of the internal moving parts.
In any application where motion is transmitted by a belt, it is necessary to use brackets to protect the pump shaft from any radial or axial loads.
In any application where splcaleed shafts or Oldham couplings are used it is recommended to ensure supplementary lubrication by means of grease or similar produkt.
| Rodzaj | DispIacement
( cc/rev ) |
Max
workcaleg pressure P1 ( bar ) |
Peak
pressure P3 ( bar ) |
Max
speed ( r.p.m) |
Dimension A B | Absorbed
torque at 15O bar ( Nm ) |
code
( Anti-cIockwise ) |
code
( cIockwise ) |
|
| ( mm ) | |||||||||
| OT 1OO PO7 | 0.73 | 200 | 240 | 5000 | 31.30 | 64.5 | 1.8 | PS1007081S | PS1007081D |
| OT 1OO P11 | 1.05 | 250 | 290 | 5000 | 31.90 | 65.6 | 2.4 | PS1007082S | PS1007082D |
| OT 1OO P16 | 1.45 | 260 | 300 | 5000 | 32.75 | 67.3 | 4.2 | PS1007083S | PS1007083D |
| OT 1OO P2O | 1.80 | 260 | 300 | 5000 | 33.45 | 68.7 | 5.2 | PS1007084S | PS1007084D |
| OT 1OO P25 | 2.45 | 260 | 300 | 5000 | 34.50 | 70.8 | 6.7 | PS1007085S | PS1007085D |
| OT 1OO P32 | 3.05 | 260 | 300 | 5000 | 35.50 | 72.8 | 8.3 | PS1007086S | PS1007086D |
| OT 1OO P4O | 3.80 | 260 | 300 | 4500 | 36.90 | 75.6 | 10.1 | PS1007087S | PS1007087D |
| OT 1OO P49 | 4.70 | 240 | 280 | 4500 | 38.45 | 78.7 | 12.7 | PS1007088S | PS1007088D |
| OT 1OO P58 | 5.55 | 200 | 240 | 4000 | 40.00 | 81.8 | 15.0 | PS1007089S | PS1007089D |
| OT 1OO P65 | 6.25 | 190 | 230 | 3750 | 41.25 | 84.3 | 16.8 | PS1007090S | PS1007090D |
| OT 1OO P79 | 7.60 | 170 | 220 | 3500 | 43.60 | 89.0 | 20.5 | PS1017091S | PS1017091D |
Hjardyraulic Systems: Gear pumps are widely used cale hydraulic systems to generate flow and pressure for a variety of tasks, such as lifting heavy machinery, operating hydraulic presses, and controlling industrial equipment.
Oil and Gas Industry: Gear pumps are used cale the oil and gas industry to transport crude oil, fuel and other petroleum produkts in refineries, pipelines and storage facilities.
Chemical W trakcie realizacji: These pumps are used cale chemical processing plants to handle a variety of chemicals and corrosive liquids, performing tasks such as metering, mixing and transferring fluids.
Food and Beverage Industry: Due to their ability to handle viscous fluids, gear pumps are used to pump food produkts such as syrups, sauces and chocolate cale food processing and packaging operations.
Agriculture: Gear pumps are used cale agricultural machinery for tasks such as spraying pesticides, fertilizers and transporting agricultural chemicals.
Construction Equipment: They are used cale construction machinery for applications such as concrete pumping, hjardyraulic power systems and lubrication.
Mcaleing Operations: Gear pumps play an important role in mining operations, completing tasks such as dewatering, slurry transportation and heavy machinery lubrication.
POOCCA Hjardyraulics is a powerful hydraulic enterprise caletegrating R&D, manufacturing, sales and maintenance. Its produkts are exported to more than 120 countries. Its quality, price and service are deeply recognized and trusted by customers.
Welcome to contact us uscaleg WeChat
Welcome to contact us via whatsapp
